Reverse total shoulder arthroplasty baseplate stability with locking vs. non-locking peripheral screws


    • Abdic S.
    • Lockhart J.
    • Alnusif N.
    • et al.

    Glenoid baseplate screw fixation in reverse shoulder arthroplasty: does locking screw position and orientation matter?.

    J. Shoulder Elb. Surg. 2021; 30: 1207-1213https://doi.org/10.1016/j.jse.2020.08.009

    • Ali A.M.
    • Newman S.D.S.
    • Hooper P.A.
    • et al.

    The effect of implant position on bone strain following lateral unicompartmental knee arthroplasty.

    Bone Joint Res. 2017; 6: 522-529https://doi.org/10.1302/2046-3758.68.BJR-2017-0067.R1

    • Andreykiv A.
    • Prendergast P.J.
    • van Keulen F.
    • et al.

    Bone ingrowth simulation for a concept glenoid component design.

    J. Biomech. 2005; 38: 1023-1033https://doi.org/10.1016/j.jbiomech.2004.05.044

    • Anglin C.
    • Wyss U.P.
    • Pichora D.R.

    Mechanical testing of shoulder prostheses and recommendations for glenoid design.

    J. Shoulder Elb. Surg. 2000; 9: 323-331

    • Ansari F.
    • Lee T.
    • Malito L.
    • et al.

    Analysis of severely fractured glenoid components: clinical consequences of biomechanics, design, and materials selection on implant performance.

    J. Shoulder Elb. Surg. 2016; 25: 1041-1050

    • ASTM F2028-17 International A.

    Standard Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation.

    ASTM International,
    2017

    • Bitzer A.
    • Rojas J.
    • Patten I.S.
    • et al.

    Incidence and risk factors for aseptic baseplate loosening of reverse total shoulder arthroplasty.

    J. Shoulder Elbow Surg. 2018; 27 (2018/08/11): 2145-2152

    • Bohsali K.I.
    • Bois A.J.
    • Wirth M.A.

    Complications of shoulder arthroplasty.

    J. Bone Jt. Surg. 2017; 99: 256-269

    • Cameron H.U.
    • Pilliar R.M.
    • Macnab I.

    The effect of movement on the bonding of porous metal to bone.

    J. Biomed. Mater. Res. 1973; 7: 301-311https://doi.org/10.1002/jbm.820070404

    • Castagna A.
    • Randelli M.
    • Garofalo R.
    • et al.

    Mid-term results of a metal-backed glenoid component in total shoulder replacement.

    J. Bone Jt. Surg. 2010; 92-B: 1410-1415https://doi.org/10.1302/0301-620X.92B10.23578

    • Chebli C.
    • Huber P.
    • Watling J.
    • et al.

    Factors affecting fixation of the glenoid component of a reverse total shoulder prothesis.

    J. Shoulder Elb. Surg. 2008; 17: 323-327https://doi.org/10.1016/j.jse.2007.07.015

    • Cronier P.
    • Pietu G.
    • Dujardin C.
    • et al.

    The concept of locking plates.

    Orthopaed. Traumatol. Surg. Res. 2010; 96: S17-S36https://doi.org/10.1016/j.otsr.2010.03.008

    • Cuff D.
    • Pupello D.R.
    • Virani N.A.
    • et al.

    Reverse shoulder arthroplasty for the treatment of rotator cuff deficiency.

    J. Bone Jt. Surg. 2008; 90: 1244-1251https://doi.org/10.2106/JBJS.G.00775

  • Cuff D, Pupello D Fau-Virani N, Virani N Fau-Levy J, et al. Reverse shoulder arthroplasty for the treatment of rotator cuff deficiency.

    • Dickinson A.S.
    • Taylor A.C.
    • Ozturk H.
    • et al.

    Experimental validation of a finite element model of the proximal femur using digital image correlation and a composite bone model.

    J. Biomech. Eng. 2010; 133https://doi.org/10.1115/1.4003129

    • Dickinson A.
    • Taylor A.
    • Browne M.

    The influence of acetabular cup material on pelvis cortex surface strains, measured using digital image correlation.

    J. Biomech. 2012; 45: 719-723

    • DiStefano J.G.
    • Park A.Y.
    • Nguyen T.-Q.D.
    • et al.

    Optimal screw placement for base plate fixation in reverse total shoulder arthroplasty.

    J. Shoulder Elb. Surg. 2011; 20: 467-476https://doi.org/10.1016/j.jse.2010.06.001

    • Formaini N.T.
    • Everding N.G.
    • Levy J.C.
    • et al.

    The effect of glenoid bone loss on reverse shoulder arthroplasty baseplate fixation.

    J. Shoulder Elbow Surg. 2015; 24 (2015/07/15): e312-e319

    • Formaini N.T.
    • Everding N.G.
    • Levy J.C.
    • et al.

    Glenoid baseplate fixation using hybrid configurations of locked and unlocked peripheral screws.

    J. Orthopaed. Traumatol. 2017; 18 (2017/01/11): 221-228

    • Frankle M.
    • Siegal S.
    • Pupello D.
    • et al.

    The reverse shoulder prosthesis for glenohumeral arthritis associated with severe rotator cuff deficiency. A minimum two-year follow-up study of sixty patients.

    J. Bone Jt. Surg. 2005; 87: 1697-1705

    • Franklin J.L.
    • Barrett W.P.
    • Jackins S.E.
    • et al.

    Glenoid loosening in total shoulder arthroplasty: association with rotator cuff deficiency.

    J. Arthroplast. 1988; 3: 39-46https://doi.org/10.1016/S0883-5403(88)80051-2

    • Friedman R.
    • Stroud N.
    • Glattke K.
    • et al.

    The impact of posterior wear on reverse shoulder glenoid fixation.

    Bull. Hosp. Jt Dis. 2015; 73: S15-S20

    • Grawe B.
    • Le T.
    • Williamson S.
    • et al.

    Fracture fixation with two locking screws versus three non-locking screws: a biomechanical comparison in a normal and an osteoporotic bone model.

    Bone Joint Res. 2012; 1: 118-124https://doi.org/10.1302/2046-3758.16.2000078

    • Guery J.
    • Favard L.
    • Sirveaux F.
    • et al.

    Reverse total shoulder arthroplasty: survivorship analysis of eighty replacements followed for five to ten years.

    JBJS. 2006; 88: 1742-1747

    • Gutiérrez S.
    • Greiwe R.M.
    • Frankle M.A.
    • et al.

    Biomechanical comparison of component position and hardware failure in the reverse shoulder prosthesis.

    J. Shoulder Elb. Surg. 2007; 16: S9-S12https://doi.org/10.1016/j.jse.2005.11.008

    • Harman M.
    • Frankle M.A.
    • Vasey M.
    • et al.

    Initial glenoid component fixation in “reverse” total shoulder arthroplasty: a biomechanical evaluation.

    J. Shoulder Elb. Surg. 2005; 14: 162S-167Shttps://doi.org/10.1016/j.jse.2004.09.030

    • Hasan S.S.
    • Leith J.M.
    • Campbell B.
    • et al.

    Characteristics of unsatisfactory shoulder arthroplasties.

    J. Shoulder Elb. Surg. 2002; 11: 431-441https://doi.org/10.1067/mse.2002.125806

    • Hoenig M.P.
    • Loeffler B.
    • Brown S.
    • et al.

    Reverse glenoid component fixation: is a posterior screw necessary?.

    J. Shoulder Elb. Surg. 2010; 19: 544-549https://doi.org/10.1016/j.jse.2009.10.006

    • Hopkins A.R.
    • Hansen U.N.
    • Bull A.M.
    • et al.

    Fixation of the reversed shoulder prosthesis.

    J. Shoulder Elb. Surg. 2008; 17: 974-980https://doi.org/10.1016/j.jse.2008.04.012

    • James J.
    • Huffman K.R.
    • Werner F.W.
    • et al.

    Does glenoid baseplate geometry affect its fixation in reverse shoulder arthroplasty?.

    J. Shoulder Elb. Surg. 2012; 21: 917-924https://doi.org/10.1016/j.jse.2011.04.017

    • James J.
    • Allison M.A.
    • Werner F.W.
    • et al.

    Reverse shoulder arthroplasty glenoid fixation: is there a benefit in using four instead of two screws?.

    J. Shoulder Elb. Surg. 2013; 22: 1030-1036https://doi.org/10.1016/j.jse.2012.11.006

    • Jasty M.
    • Bragdon C.
    • Burke D.
    • et al.

    In vivo skeletal responses to porous-surfaced implants subjected to small induced motions.

    J. Bone Jt. Surg. 1997; 79 (Journal Article): 707-714

    • Kalouche I.
    • Crepin J.
    • Abdelmoumen S.
    • et al.

    Mechanical properties of glenoid cancellous bone.

    Clin. Biomech. 2010; 25: 292-298https://doi.org/10.1016/j.clinbiomech.2009.12.009

    • Kwon Y.W.
    • Forman R.E.
    • Walker P.S.
    • et al.

    Analysis of reverse total shoulder joint forces and glenoid fixation.

    Bull. Hosp. Jt. Dis. 2010; 68 (2010/12/18): 273-280

    • Lung T.S.
    • Cruickshank D.
    • Grant H.J.
    • et al.

    Factors contributing to glenoid baseplate micromotion in reverse shoulder arthroplasty: a biomechanical study.

    J. Shoulder Elb. Surg. 2019; 28: 648-653

    • Martin E.J.
    • Duquin T.R.
    • Ehrensberger M.T.

    Reverse total shoulder glenoid baseplate stability with superior glenoid bone loss.

    J. Shoulder Elb. Surg. 2017; 26: 1748-1755https://doi.org/10.1016/j.jse.2017.04.020

    • Martin E.J.
    • Duquin T.R.
    • Ehrensberger M.T.

    Reverse total shoulder arthroplasty baseplate stability in superior bone loss with augmented implant.

    J. Should. Elbow Arthropl. 2021; 5 (24715492211020689)https://doi.org/10.1177/24715492211020689

    • Meding J.B.
    • Small S.R.
    • Jones M.E.
    • et al.

    Acetabular cup design influences deformational response in total hip arthroplasty.

    Clin. Orthop. Relat. Res. 2013; 471: 403-409https://doi.org/10.1007/s11999-012-2553-7

    • Meding J.B.
    • Small S.R.
    • Jones M.E.
    • et al.

    Acetabular cup design influences deformational response in total hip arthroplasty.

    Clin. Orthop. Relat. Res. 2013; 471: 403-409https://doi.org/10.1007/s11999-012-2553-7

    • Parsons B.O.
    • Gruson K.I.
    • Accousti K.J.
    • et al.

    Optimal rotation and screw positioning for initial glenosphere baseplate fixation in reverse shoulder arthroplasty.

    J. Shoulder Elb. Surg. 2009; 18: 886-891https://doi.org/10.1016/j.jse.2008.11.002

    • Pilliar R.M.
    • Lee J.M.
    • Maniatopoulos C.

    Observations on the effect of movement on bone ingrowth into porous-surfaced implants.

    Clin. Orthop. Relat. Res. 1986; 208: 108-113

    • Roche C.
    • Stroud N.J.
    • Martin B.L.
    • et al.

    Achieving fixation in glenoids with superior wear using reverse shoulder arthroplasty.

    J. Shoulder Elb. Surg. 2013; 22: 1695-1701https://doi.org/10.1016/j.jse.2013.03.008

    • Sawbones

    Sawbones: Biomechanical Test Materials.

    2016 (accessed 5/23/2016 2016)

    • Small S.R.
    • Berend M.E.
    • Howard L.A.
    • et al.

    Acetabular cup stiffness and implant orientation change acetabular loading patterns.

    J. Arthroplast. 2013; 28: 359-367https://doi.org/10.1016/j.arth.2012.05.026

    • Small S.R.
    • Rogge R.D.
    • Malinzak R.A.
    • et al.

    Micromotion at the tibial plateau in primary and revision total knee arthroplasty: fixed versus rotating platform designs.

    Bone Joint Res. 2016; 5: 122-129https://doi.org/10.1302/2046-3758.54.2000481

    • Small S.R.
    • Hensley S.E.
    • Cook P.L.
    • et al.

    Characterization of femoral component initial stability and cortical strain in a reduced stem-length design.

    J. Arthroplast. 2017; 32: 601-609https://doi.org/10.1016/j.arth.2016.07.033

    • Stroud N.J.
    • DiPaola M.J.
    • Martin B.L.
    • Steiler C.A.
    • Flurin P.-H.
    • Wright T.W.
    • et al.

    Initial glenoid fixation using two different reverse shoulder designs with an equivalent center of rotation in a low-density and high-density bone substitute.

    J. Shoulder Elb. Surg. 2013; 22: 1573-1579

    • Tayton E.
    • Evans S.
    • O’Doherty D.

    Mapping the strain distribution on the proximal femur with titanium and flexible-stemmed implants using digital image correlation.

    J. Bone Joint Surgery Brit. 2010; 92: 1176-1181

    • Werner C.M.L.
    • Steinmann P.A.
    • Gilbart M.
    • et al.

    Treatment of painful pseudoparesis due to irreparable rotator cuff dysfunction with the delta III reverse-ball-and-socket total shoulder prosthesis.

    J. Bone Jt. Surg. 2005; 87: 1476-1486https://doi.org/10.2106/jbjs.D.02342

    • Zhang D.S.
    • Arola D.D.

    Applications of digital image correlation to biological tissues.

    J. Biomed. Opt. 2004; 9: 691-699https://doi.org/10.1117/1.1753270



  • Source link

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Previous Article

    Self-propelled, endlessly programmable artificial cilia: Simple microstructures that bend, twist and perform stroke-like motions could be used for soft robotics, medical devices and more

    Next Article

    What A Metroid 64 Could Have Looked Like

    Related Posts